Disclaimer: We recommend using a framing system for your project, which provides a sturdy and chemical-free construction that securely holds the bricks together. However, if you'd like to use a glue adhesive for your Himalayan Salt wall, consider the following information.
There are numerous online searches for adhesives or glues suitable for building a Himalayan Salt brick wall. While some suppliers offer moderately priced solutions like Saltite or similar salt adhesives that are effective, it's sometimes worth considering making your own Himalayan salt glue.
When building a salt wall, it's important to use an adhesive that is suitable specifically for salt bricks and blocks, rather than standard grout. This type of adhesive is formulated to bond with the natural properties of salt, ensuring a secure and long-lasting hold.
Some examples of DIY adhesives that can be used for salt walls include:
- Epoxy-based adhesives, which provide a strong and durable bond
- Acrylic-based adhesives, which offer flexibility and water resistance
- Polyurethane-based adhesives, which provide a flexible and impact-resistant bond
- Natural adhesives, such as clay-based or plant-based options, for a more eco-friendly approach.
It's important to follow the manufacturer's instructions for the specific adhesive you choose, to ensure a successful and safe installation. Additionally, it's recommended to consult with a professional if you're unsure about the best adhesive to use for your specific project.
Always test a small area first to ensure compatibility and bonding.
- Follow the mixture ratios and instructions carefully.
- Apply the adhesive in a thin layer and clamp the salt bricks together until set.
- Allow the adhesive to dry completely before exposing the salt bricks to moisture or humidity.
Remember to research and understand the properties and limitations of each adhesive variant before using them for your project.
1. Epoxy-based adhesive:
- Mix 1 part epoxy resin with 1 part hardener.
- Add a small amount of sand or silica powder for improved bonding.
- Apply and clamp the salt bricks together.
CONs: quite expensive component
2. Acrylic-based adhesive:
- Mix 1 part acrylic polymer with 1 part water.
- Add a small amount of glycerin for improved flexibility.
- Apply and clamp the salt bricks together.
3. Polyurethane-based adhesive:
- Mix 1 part polyurethane resin with 1 part hardener.
- Add a small amount of sand or silica powder for improved bonding.
- Apply and clamp the salt bricks together.
PROs: affordable solution
Loctite® Teroson® Polyurethane Adhesive MS 5510
4. Lime-based adhesive:
- Mix 1 part slaked lime (calcium hydroxide) with 2 parts sand.
- Add a small amount of water to create a workable paste.
- Apply and clamp the salt bricks together.
CONs: quite expensive component
5. Clay-based adhesive:
- Mix 1 part clay powder with 1 part water.
- Add a small amount of sand or sawdust for improved bonding.
- Apply and clamp the salt bricks together.
PROs: reasonably priced solution
6. Silicate-based adhesive:
- Mix 1 part sodium silicate with 2 parts water.
- Add a small amount of sand or silica powder for improved bonding.
- Apply and clamp the salt bricks together.
Note: When working with epoxy, polyurethane, and silicate-based adhesives, make sure to follow safety guidelines and use protective gear.
Himalayan salt bricks can be glued with a special composition consisting of three components:
- magnesium carbonate
- magnesium chloride
- water
To prepare the glue for a 10 square foot area, mix 2 pounds of magnesium carbonate with 3.5 pounds of magnesium chloride in 350 milliliters of water.
Another option for installing a Himalayan Salt brick wall is...